The presented configuration is the most frequently chosen by customers – a proven and efficient choice for serial production

Main Features:

• Front supports: 2 pieces on linear guides, providing stability during bending operations

• Y1, Y2 axis control: servo drive with encoders

• Backgauge control (X axis): servo drive with encoders

• R axis control: servo drive with encoders

• Automatic crowning compensation

• Double-sided punch clamping: quick-release AMADA-type system enabling rapid tool changes

Available configurations are tailored to production needs and the type of workpieces – the machine specifications are individually adjusted according to application and technological requirements.

Technical Parameters

Automatic adjustment of backgauge travel (X axis) and R axis (manual option*). The R axis facilitates bending of larger radii, e.g. by step bending system.

Optionally, adjustment of fingers in axes Z1, Z2, R1, R2, X1, X2 with servomotors.

To achieve a satisfactory result of step bending, certain calculations are necessary, requiring knowledge of several key parameters related to the bending process – these are:

• Arc length – the distance between the ends of the curved section of the sheet measured on the inner side of the bend;
• Number of bends – the number of single bends required to achieve a sheet with a specific radius; the higher the number of bends, the smaller the individual bend angle and the smoother the curve;
• Distance between bends – the distance between each successive bend performed during the process.

Although the entire step bending process may seem quite complex, CORMAK machines and software are now advanced enough to fully support the operator in many areas.

Automatic crowning compensation

Ensures the same bending angle along the entire length of the bend – (option*)

Manual crowning compensation (option*)

Ensures the same bending angle along the entire bending length – (option*)

High-quality components:

• Electrical system components by Schneider/Delta/Eaton
  
  

Control and Functionality:

DELEM DA-58T

• Equipped with a 10-inch touchscreen, installed on a movable arm allowing comfortable operation throughout the entire working area of the machine
• Programmability: possibility to save up to 2000 programs, with 30 steps each, enabling flexible adaptation to different bending tasks
• Ergonomic Operation: intuitive menu with English abbreviations ensures quick and easy operation

Optional controllers available: DELEM DA-53T+2D, DA-66T as well as DA-69T, or CYBELEC 12

DA-53T+2D

Display

• 10.1" TFT LCD touchscreen
• Colour display

External software

• Offline workstation licence Profile-53TL (creating bending sequences on PC)

System

• Windows operating system
• 200 MHz processor
• 1 GB internal memory
• Control logic preventing collision between working axes

Functions

• Punch and die library /30 punches & 60 dies/ – descriptive and graphical library
• Program library with graphic preview and product catalogue
• Material database /possibility of adding new sheet types/
• Creating bent part drawing on controller display /2D/
• Creating bending program based on product drawing /2D/
• Machine operation with real-time 2D bending sequence preview
• 2D bending simulation with collision display /step-by-step simulation/
• Warning message system (e.g. tool overload)
• Possibility of changing bending order, modifying program steps
• Saving corrections in memory
• Manual mode operation
• Manual axis positioning of backgauge
• Automatic stroke and force calculation depending on material type
• Automatic positioning of backgauge
• Automatic inner radius and flat length calculation
• Backup of tools and products
• USB port

DA-58T

Display

• 15" TFT LCD touchscreen
• Colour display

External software

• Offline workstation licence Profile-53TL (creating bending sequences on PC)

System

• Windows operating system
• 200 MHz processor
• 4Mb RAM
• Max number of programs: 9999 (25 steps each)
• Max step repetition: 99
• Control logic preventing axis collision

Functions

• Punch and die library /30 punches & 60 dies/
• Descriptive and graphical libraries
• Program library with graphical preview and catalogue
• Material database with possibility of adding new materials
• Creating bent part drawing /2D/
• Program creation based on product drawing /2D/
• Real-time 2D process simulation
• Step-by-step collision simulation
• Warning system (e.g. tool overload)
• Change of bending order and correction entry
• Manual mode and axis positioning
• Automatic stroke and bending force calculation
• Automatic backgauge positioning
• Automatic calculation of inner radius and flat development
• Backup creation of tools and products
• USB port

DA-66T

Display

• 17” TFT LCD touchscreen
• Colour display

External software

• LITE T2D workstation licence (creating bending sequences on PC)

System

• Windows CE operating system
• 64Mb RAM
• Max programs: 1000 /1GB/
• Max step repetition: 99

Functions

• Drawing bent part on controller screen (2D)
• Automatic bending program creation (2D)
• Automatic stroke and force calculation
• 3D visualisation of bending process (step-by-step simulation)
• Automatic finger positioning under punch and die
• Collision and overload warnings
• Editable bending sequence
• Automatic flat length calculation
• Manual control option
• Material and tool libraries
• Work counter and operating hours counter
• USB port

DA-69T

Display

• 17” TFT LCD touchscreen
• Colour display

External software

• LITE T3D workstation licence (creating bending sequences on PC)

System

• Windows CE operating system
• 64Mb RAM
• Max programs: 1000 /1GB/
• Max step repetition: 99

Functions

• DXF file import
• 3D import to IGES & SAT formats
• Creating 3D bend part drawings
• Automatic program generation from 3D drawing
• Automatic stroke and bending force calculation
• Automatic backgauge positioning
• 3D visualisation of the bending process (step-by-step simulation)

CYBELEC 12

Display

• 12” TFT LCD touchscreen
• Colour display

System

• Windows CE operating system
• Max punches: 100
• Max programs: 300
• Max step repetition: 24
• Max materials: 10

Functions

• User-friendly HMI interface
• 2D profile drawing and 3D visualisation
• Automatic bending sequence
• High bending precision ensured by advanced algorithms
• Tandem mode
• Tool import
• Pre- and post-bending
• Angle measurement support
• Barcode reader compatibility
• Industry 4.0 ready

The machine combines advanced technology with simplicity of operation, making it ideal both for precise manual tasks and efficient serial production. High-quality components and advanced safety systems ensure reliability and operator protection.

Safety

Laser safety system

Equipped as standard with a top-class laser safety system protecting the operator and significantly speeding up the bending process.

High-quality hydraulic connections and safety valves ensure full compliance with CE safety standards.

Guarding systems and interlocks comply with CE regulations to guarantee safe working conditions.

CE-compliant safety enclosures

Ergonomics and Additional Features:

• Mobile controller on adjustable arm
• LED lighting: improves comfort and safety of operation
• Front supports on linear guides
• Follower supports (option*)

CORMAK press brakes are equipped with advanced protection systems, including clear safety markings, side guards, rear safety gates and easily accessible emergency stops.

Each machine is supplied with a clear and detailed user manual.

A CE declaration confirms compliance with safety standards — the key is the safety systems installed in the machine.

SCO – Oil Cooling System

Standard system ensuring stable operating parameters of the machine even during long, continuous use.

Tool Clamping System:

• Standard divided multi-slot four-sided dies and divided punches
• The basic system used in CORMAK press brakes is the manual AMADA-type (European) system allowing for quick tool changes
• Punches are side-mounted and clamped with screws

Selection of die and punch

The correct selection of tooling, i.e. die and punch, is essential to achieve the desired bending result.
CORMAK press brakes perform continuous bending measurements and automatically correct deviations during the process to achieve optimal results.

Depending on the press force, divided punches and dies may vary in length.

Included with the machine

Telephone consultations with a specialist

You can always rely on expert technical support.

Terms of cooperation

• 24-month warranty
• Factory-new machine
• Warranty and post-warranty service provided by the supplier

Training and Machine Commissioning

It is possible to arrange professional training and machine commissioning carried out by a Cormak technician — this service is priced individually.

Contact our advisor to get more information.

Contact us

*The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details.