The presented configuration is the most popular choice among customers – a proven and efficient solution for serial production

Main Features:

• Front supports: 2 pieces on linear guides, providing stability during bending operations

• Y1, Y2 axis adjustment: automatic

• Rear gauge adjustment (X axis): servo drive on encoders

• R axis adjustment: servo drive on encoders

• Automatic crowning adjustment

• Double-sided punch holder: quick-change AMADA-type system allowing fast tool replacement

• Motor: 9.5kW (option*)

Available configurations are tailored to production needs and the type of processed parts – the specification is determined individually depending on the application and technological requirements.

Technical parameters

Automatic adjustment of backgauge travel (X axis) and R axis (manual option*). R axis facilitates bending of larger radii, e.g. step bending system.

Optional regulation of fingers in axes Z1, Z2, R1, R2, X1, X2 on servomotors.

To achieve a satisfactory step bending effect, it is essential to make certain calculations that require knowledge of the key parameters of the bending process, including:

• Arc length – the distance between the ends of the bent curve of the sheet measured on the inner side of the bend;
• Number of bends – the number of single bends required to achieve a given radius; the higher the number of bends, the smaller each bending angle and the smoother the curve;
• Distance between bends – the spacing between individual bends performed during the process.

Although step bending may seem complex, CORMAK machines and software are advanced enough to automate most of the process and assist the operator.

Automatic deflection crowning compensation

Ensures a consistent bending angle along the entire bending length – (option*)

Manual deflection crowning compensation (option*)

Ensures a consistent bending angle along the entire bending length – (option*)

High-quality components:

• Electrical system components by Schneider/Delta/Eaton
  
  

Control and Functionality:

DELEM DA-53TX

• Equipped with a 15-inch touchscreen installed on a movable arm, allowing comfortable operation across the entire work area
• Advanced programming algorithms with automatic bending sequence calculation
• Supports up to four axes for more complex operations
• Compatible with various press brake configurations
• Option*: drawing the bent part directly on the controller display /2D/
• Option*: creating bending programs based on imported 2D drawings
• Option*: real-time 2D visualisation of bending sequences during operation

Optional DELEM controllers also available: DA-53T+2D, DA-66T and DA-69T, or CYBELEC 12

DA-53T+2D

Display

• 10.1" TFT LCD touchscreen
• Colour display

External software

• Offline Profile-53TL workstation licence (bending sequence creation on PC)

System

• Windows-based operating system
• 200 MHz processor
• Internal memory 1GB
• Control logic preventing axis collision

Functions

• Punch and die library /30 punches & 60 dies/ – graphic and descriptive library
• Program library with graphical preview and product cataloguing
• Material database /possibility to add new materials/
• 2D drawing creation on the display
• Bending program generation from product drawing (2D)
• 2D simulation of bending process with real-time view
• Step-by-step 2D bending simulation with collision preview
• Warning messages (e.g. tool overload)
• Ability to modify program step order and corrections
• Manual operation mode
• Manual positioning of each backgauge axis
• Automatic calculation of ram stroke, bending force, backgauge position, and material allowance
• Backup and USB support

DA-58T

Display

• 15" TFT LCD touchscreen
• Colour display

External software

• Offline Profile-53TL workstation licence (bending sequence creation on PC)

System

• Windows-based operating system
• 200 MHz processor
• 4Mb RAM
• Max. number of programs: 9999 (25 steps max)
• Max. step repetition: 99
• Control logic preventing axis collisions

Functions

• Punch and die library /30 punches & 60 dies/
• Descriptive and graphical library
• Program library with graphic preview and product catalogue
• Material database /option to add new materials/
• 2D part drawing on the controller screen
• Automatic bending program generation from 2D drawing
• Real-time 2D bending simulation
• 2D simulation with collision preview (step-by-step)
• Warning messages (e.g. tool overload)
• Possibility to modify bending order, program steps, and apply corrections
• Manual operation mode
• Manual positioning of backgauge axes
• Automatic ram stroke and force calculation based on material type
• Automatic backgauge and inner radius calculation
• Backup of tools and products via USB

DA-66T

Display

• 17” TFT LCD touchscreen
• Colour display

External software

• LITE T2D workstation licence (bending sequence creation on PC)

System

• Intuitive control system
• Stable Windows CE operating environment
• 64Mb RAM
• Max. number of programs: 1000 /1Gb/
• Max. step repetition: 99

Functions

• 2D part drawing and automatic bending program creation
• Automatic ram stroke and bending force calculation depending on material
• Automatic backgauge setting according to the program
• 3D bending process visualisation (step-by-step simulation)
• Automatic finger positioning behind the selected punch and die segments
• Collision and overload warnings
• Material allowance calculation
• Manual axis control via jog wheel
• Manual mode operation
• Material, punch, die and program libraries
• Stroke and operating hours counters
• USB port and backup functionality

DA-69T

Display

• 17” TFT LCD touchscreen
• Colour display

External software

• LITE T3D workstation licence (3D bending sequence creation on PC)

System

• Windows CE operating system
• 64Mb RAM
• Max. number of programs: 1000 /1Gb/
• Max. step repetition: 99

Functions

• DXF import
• 3D import via IGES & SAT from LITE T3D
• 3D bending program creation from product drawing
• Automatic ram stroke and force calculation
• Automatic backgauge setting per bending sequence
• 3D bending visualisation (step-by-step simulation)

CYBELEC 12

Display

• 12” TFT LCD touchscreen
• Colour display

System

• Windows CE-based control
• Max. number of punches: 100
• Max. number of dies: 100
• Max. number of programs: 300
• Max. step repetition: 24
• Max. number of materials: 10

Functions

• User-friendly HMI interface
• 2D profile drawing and 3D visualisation
• Automatic bending sequence generation
• Highest bending precision with advanced algorithms
• Tandem operation
• Tool import
• Pre-/Post-bend functionality
• Angle measurement support
• Barcode reader support
• Industry 4.0 ready

The machine combines advanced technology with ease of operation, making it ideal for precise manual work and efficient serial production. High-quality components and advanced safety systems ensure reliability and user safety.

Safety

Laser safety system

Supplied as standard – top-class laser safety system that protects the operator and more than doubles bending process efficiency.

IRIS Plus laser system (option*)

The IRIS Plus laser system is an advanced solution for press brakes, ensuring precise and safe positioning of tools and material. It enables real-time bending angle measurement and correction, significantly increasing accuracy and process efficiency.

We do not compromise on safety! Top-quality hydraulic fittings and safety valves ensure reliability and operator protection.

Beware of pseudo-safety devices such as gates or light curtains that are not CE-compliant and pose a risk to workers’ health. The employer is responsible for employee safety!

CE-compliant safety guards

Ergonomics and additional features:

• Mobile controller on a movable arm
• LED lighting: improves comfort and safety at work
• Front supports on linear guides
• Follow-up sheet supports (option*)

CORMAK press brakes are equipped with a full range of safety elements, including clear markings, side covers, rear safety gates, and easily accessible emergency switches.

Each machine is supplied with a comprehensive user manual.

Having a CE declaration does not automatically guarantee safety — the installed systems determine the real protection!

SCO – Oil Cooling System

Supplied as standard, the system guarantees stable machine performance even during long, continuous operation.

Punch and die clamping:

• Standard split four-sided multi-groove dies and sectional punches
• Manual AMADA (European) type quick-change system allowing easy tool replacement
• Punches are side-mounted and locked with screws

Punch and die selection

The proper selection of tools is crucial to achieve the desired final bending result.
CORMAK press brakes continuously measure bending parameters and can automatically compensate deviations during the process for optimal results.

Depending on the press force, sectional punches and dies may vary in length.

Included with the machine

Telephone consultations with a specialist

You can always count on support from our specialists.

Terms of cooperation

• 24-month warranty
• Brand new machine
• Warranty and post-warranty service provided by the supplier

Training and Machine Commissioning

It is possible to arrange professional training and machine commissioning carried out by a Cormak technician — this service is priced individually.

Contact our advisor to get more information.

Contact us

*The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details.