NEW !!!
Screw Air Compressor CORMAK LUFT 1000 VSD+PM – compact power for your business – ENERGY SAVER
Looking for a professional compressed air solution for workshops, paint shops or small production lines? The CORMAK LUFT 1000 VSD+PM screw air compressor is the ideal choice. With 7.5kW motor power and an impressive real capacity of up to 990L/min, it ensures a steady air supply for impact wrenches, blow guns and spray tools.
This 400V model is designed for continuous operation, making it perfect for demanding applications such as mechanical workshops, tyre services and small-scale manufacturing. Investing in a CORMAK screw air compressor means improved comfort at work – say goodbye to noisy piston compressors and enjoy quieter, smoother performance.
The LUFT 1000 VSD+PM features a reliable and efficient direct-drive transmission system, eliminating vibrations and the need for belt-tension adjustments. This proven solution ensures stable operation, longer lifespan and direct power transfer from motor to screw element.
Maximum working pressure: 10 bar. The intuitive MAM electronic control panel provides full access to key operating parameters, ensuring flexibility and easy management of air system performance.
✅ Pressure: up to 10 bar | ✅ Capacity: up to 990 L/min | ✅ Power: 7.5kW | ✅ Voltage: 400V
Energy Saver Line: The New Era of Efficiency
The Energy Saver line is an advanced series of screw compressors designed to significantly reduce operating costs. Since energy accounts for nearly 80% of compressed air system expenses, these models set a new industrial standard.
Key Features of the Energy Saver Series:
1. Permanent Magnet Motor Technology (PM)
Most compressors in this series use Permanent Magnet motors, offering higher efficiency than standard induction motors:
- Efficiency levels meeting IE4 or even IE5 standards.
- High performance even at low speeds – no loss of efficiency outside the nominal range.
- Smaller, lighter design with lower heat generation.
2. Advanced Variable Speed Drive Control (VSD)
The heart of the Energy Saver line is the integrated frequency inverter (VSD).
- Demand-based control: The compressor operates only at the required output level – reducing motor speed and energy consumption proportionally.
- Eliminates idle running: Traditional compressors often run unloaded, consuming 25–30% of nominal power. Energy Saver models nearly eliminate this waste.
3. Soft Start Function
Thanks to the inverter, start-up begins smoothly from 0 Hz, avoiding power surges and ensuring:
- Protection of the plant’s electrical system.
- Frequent start/stop capability without overheating.
4. Real Energy Savings
The Energy Saver line can reduce electricity costs by 30–50% compared with fixed-speed compressors. Stable pressure control (accuracy ±0.1 bar) ensures consistent performance for precision machinery such as laser cutters. Extended lifespan: Reduced pressure and temperature fluctuations increase screw element durability.
Main Advantages of Permanent Magnet Motors (PM)
- Higher energy efficiency: PM motors generate their magnetic field without rotor current, eliminating reactive and Joule losses for IE4+ efficiency.
- Higher power factor: Draw less current for the same power, reducing energy costs.
- Compact and powerful: Smaller and lighter, yet capable of higher torque output.
- Constant torque and fast dynamics: Ideal for precision control, CNC and robotic systems.
- Wide speed range: Efficient across all load conditions.
- Improved reliability: Fewer moving parts, less heat, longer service life.
VSD Inverter – Optimised Compressor Control
The integrated inverter continuously adjusts motor speed to actual air demand. This ensures optimal energy use and system stability.
- Up to 50% energy savings through reduced idle time and lower power draw.
- Stable air pressure even under fluctuating demand.
- Soft start eliminates current spikes and mechanical stress.
- Longer component life – less wear on bearings and screw block.
- Lower noise level at reduced speeds for better workshop comfort.
- Smart monitoring and diagnostics via MAM control panel for maintenance planning.
Screw Element – The Heart of Your Compressor
The CORMAK LUFT 1000 VSD+PM features a high-quality screw module ensuring top performance and durability. Built for demanding industrial environments, the screw element provides stable pressure and high output with minimal energy use.
- Modern design and high efficiency for reduced energy consumption.
- Precision control for constant pressure in pneumatic systems.
- Long service life through durable construction and premium materials.
Intuitive CORMAK Control Panel – Full Management at Your Fingertips
The MAM control system enables comprehensive monitoring of compressor performance. The user-friendly interface allows easy configuration, while automatic alerts ensure safe operation.
- Real-time monitoring of pressure, temperature and working status.
- Quick configuration of parameters.
- Instant fault or maintenance notifications.
Complete Documentation for Pressure Vessel Certification
The set includes complete documentation required for registration and inspection, including:
- Declaration of conformity,
- Tank certificate with technical drawing,
- Safety valve certificate,
- User manual.
Technical Specifications
|
|---|
| Motor power |
7.5kW / 11HP |
| Voltage |
400V / 50Hz |
| Capacity (0–6 bar) |
990L/min |
| Capacity at 8 bar |
950L/min |
| Max pressure |
10 bar |
| Outlet fitting |
3/4" |
| Dimensions |
900 × 620 × 820 mm |
| Weight |
110 kg |
Refrigerated Air Dryer IZBERG N10S
The CORMAK refrigerated air dryer is a professional industrial unit designed to effectively remove moisture, water vapour and oil particles from pneumatic systems. Using advanced cooling technology, this refrigerated dryer guarantees stable operation of compressed-air-powered equipment, improving reliability and extending service life. It is the ideal choice for companies seeking efficient and modern air-treatment systems.
Main Advantages of the CORMAK Air Dryer
- Advanced refrigeration system – two-stage air cooling process for effective moisture and oil separation.
- Stable operation up to 10 bar – compatible with standard industrial air systems.
- High efficiency – capacity up to 1500 L/min for medium and large-scale pneumatic installations.
- Energy-saving design – variable-speed fan reduces power use to only 0.58kW.
- Automatic condensate drain – reliable discharge without operator supervision.
- Compact size and easy installation – ideal for retrofitting into existing systems.
- Eco-friendly refrigerant R134a – efficient and compliant with environmental standards.
Construction and Technology
The dryer has been engineered for maximum performance and durability, ensuring consistent air quality and minimal maintenance.
1. Air-to-Air Heat Exchanger
The incoming compressed air passes through a heat exchanger where it is pre-cooled by the outgoing chilled air. The counterflow design increases overall system energy efficiency.
2. Refrigeration Evaporator
In the second stage, the compressed air passes through the evaporator and is cooled to a dew point of 3°C, causing water vapour and oil aerosols to condense.
3. Condensate Separator
The cooled air-condensate mixture is directed to a high-efficiency separator, where condensed liquids are automatically removed.
4. Fan Speed Control System
The variable-speed fan system adjusts the cooling intensity to demand, reducing energy consumption and component wear.
Precision and Performance
Using advanced refrigeration technology, the CORMAK air dryer efficiently removes moisture and oil, protecting installations against corrosion, actuator damage and pneumatic tool failures. A constant dew point temperature ensures consistent air quality and reliable pneumatic system operation.
Applications
The CORMAK refrigerated air dryer is suitable for various industries where clean and dry compressed air is essential:
- Mechanical workshops
- Production plants
- Food industry (with additional hygienic filters)
- Electronics manufacturing
- Industrial automation
- Paint-spray systems and coating cabins
- Pneumatic CNC machines
Equipment
- Automatic condensate drain
- Integrated water and oil separator
- Variable-speed fan – automatic speed adjustment
- Electronic control system – stable operation parameters
- Compact, durable housing – resistant to industrial conditions
Technical Specifications:
Air Dryer IZBERG N10S
| Parameter | Value |
|---|
| Inlet/Outlet Pipe Diameter (BSP) |
1" |
| Maximum Working Pressure |
10 bar |
| Maximum Inlet Air Temperature |
≤ 38°C |
| Dew Point Temperature |
3°C |
| Capacity |
1500 L/min |
| Power Consumption |
0.58 kW |
| Supply Voltage |
230 V |
| Dimensions (L × W × H) |
380 × 600 × 625 mm |
| Weight |
31 kg |
| Refrigerant Type and Quantity |
R134a, 400 g |
Choose Professional Air Treatment
By choosing the CORMAK refrigerated air dryer, you invest in the reliability and performance of your pneumatic system. This is an essential component of any professional compressed-air installation – especially where high air purity and protection from corrosion and failures are critical.
Don’t risk downtime due to moisture – choose the CORMAK air dryer and maintain total control over air quality!
1000L Vertical Air Receiver with Fittings – High-Quality Pressure Vessel for Compressed Air Installations
The CORMAK 1000L air receiver with 11 bar working pressure provides reliable compressed-air storage for workshops, production facilities and industrial systems. Its robust steel structure, compliance with EU directives and UDT certification make it a key component of every professional compressed-air setup. The optimised design ensures strength, durability and stable pressure regulation.
Main Advantages of the CORMAK 1000L Air Receiver
- Professional pressure vessel design – made from 4mm thick, corrosion-resistant structural steel.
- UDT and CE certified – complies with all relevant EU safety standards.
- Working pressure 11 bar – suitable for most pneumatic systems.
- Large 1000L capacity – ensures stable air supply and reduces compressor duty cycles.
- Multi-port connection system – 6 connectors (2" and 1/2") allow flexible installation.
- Premium anti-corrosion finish – internal and external protective coating.
- Vertical space-saving design – ideal for industrial use where space is limited.
Design and Technology – Robust Construction for Demanding Conditions
This compressed-air receiver is built for heavy-duty use. The 4mm thick steel body withstands up to 11 bar and guarantees long service life. All welds are tested for strength, and both internal and external surfaces are coated with a durable anti-corrosion paint resistant to chemicals and environmental factors.
The tank includes a CE nameplate and UDT approval marking for operation within the European market. Supplied with full technical documentation, passport and material certificates.
Performance and Reliability – Stable Pressure and Extended Compressor Life
With its 1000L capacity, the receiver acts as an air buffer that stabilises pressure across the pneumatic network. It ensures consistent air supply, reduces compressor start/stop frequency and helps extend compressor lifespan. The vertical construction allows compact installation, even in limited spaces.
A properly selected air tank minimises pressure drops and prevents system overloads, increasing efficiency and safety throughout the pneumatic system.
Applications – Universal Use in Industrial and Workshop Settings
CORMAK air receivers are widely used in automotive, manufacturing and industrial automation sectors, serving as:
- Compressor air tanks – for compressed-air storage,
- Air receiver buffers – to reduce compressor cycling,
- Compressed-air reservoirs – to supply machines and tools continuously,
- Components of automation and painting systems,
- Essential parts of pneumatic control installations.
Standard Equipment
- 6 connection ports – sizes 2", 1/2"
- CE nameplate
- UDT notified body number
- Full technical documentation and pressure passport
- Internal and external anti-corrosion coating
Technical Specifications:
| Weight (kg) |
230 |
| Connections |
6 |
| Connection Sizes |
2", 1/2" |
| Dimensions |
230 × 80.8 cm |
| Tank Capacity (L) |
1000 |
| Working Pressure (bar) |
11 |
| Wall Thickness (mm) |
4 |
| Diameter (mm) |
Ø 808 |
| Height (mm) |
2300 |
Included Fittings
- Plug 1/2" – 2 pcs
- Nipple 1/2" – 1 pc
- Tee 1/2" – 1 pc
- Reducer 1/2" to 1/4" – 1 pc
- Pressure gauge 1/4" – 1 pc
- Reducer 1" to 3/4" – 2 pcs
- Ball valve 1/2" – 1 pc
Important!
The safety valve is not included and must be purchased separately.
Contact us and order a complete system tailored to your needs!
