CORMARK provides instructional videos on their YouTube channel, which can be very helpful during the initial setup of the device. These materials make it easy to get familiar with the operation and key functions of our machines. We encourage you to watch them to make your start with our products smoother!
Advantages of the laser welder:
-
Easy to use – thanks to the applied solutions and thoughtful design, the operator can start working after a short training.
-
Low indirect radiation; during operation, simply wear protective glasses to filter intense light.
-
Much faster welding compared to traditional methods, with productivity increasing by 3 to 10 times.
-
Concentrated beam: minimal structural changes due to a small heat-affected zone.
-
Consistent welds; the weld seam is neat and has high strength.
-
Capable of welding very thin materials, such as 0.5 mm stainless steel.
-
Option to weld with or without wire.
| Technical Specifications | Value |
|---|
| Maximum Power |
1500 W |
| Laser Wavelength |
1080 nm |
| Penetration Depth (stainless steel at 1 m/min) |
3.59 mm |
| Penetration Depth (black steel at 1 m/min) |
2.77 mm |
| Penetration Depth (aluminum at 1 m/min) |
3.0 mm |
| Penetration Depth (brass at 1 m/min) |
3.0 mm |
| Welding Speed |
0-120 mm/s |
| Automatic Wire Feeder Diameter |
Ø 0.8 - 1.6 mm |
| Maximum Power Consumption |
≤4.5 kW |
| Cooling System |
Water cooling |
| Operating Voltage |
230 V |
| Shielding Gas Consumption |
20 L/min |
| Dimensions (L x W x H) |
600 x 1100 x 1100 mm |
| Weight Approx. |
170 kg |
| Material | WELDER POWER | 1000 W | 1500 W | 2000 W | 3000 W |
|---|
| Stainless Steel |
|
0.5–3.0 mm |
0.5–4.0 mm |
0.5–5.0 mm |
0.5–8.0 mm |
| Black Steel |
|
0.5–2.5 mm |
0.5–3.5 mm |
0.5–4.5 mm |
0.5–8.0 mm |
| Galvanized Steel |
|
0.5–1.2 mm |
1.5–1.8 mm |
1.5–4.0 mm |
1.5–7.0 mm |
| Aluminum |
|
0.5–1.2 mm |
1.5–1.8 mm |
1.5–4.0 mm |
1.5–7.0 mm |
| Brass |
|
0.5–1.2 mm |
1.5–1.8 mm |
1.5–2.5 mm |
1.5–4.0 mm |
LATEST GENERATION WELDING HEAD
-
WOBBLE type welding head;
-
Automatic wire feeder included;
-
Adjustable spot size 0-5mm;
-
High-power welding head allows multiple beam movement patterns: ○, ―, •, ꓷ, 0, ▲, 8;
-
Integrated connections for shielding gases and cooling system;
-
Replaceable nozzles enable welding at different angles;
-
10 m fiber optic cable connecting the head to the source;
-
Welding parameters can be adjusted directly on the head without needing to access the control panel;
-
Fully ergonomic – thanks to its lightweight and flexible design, the head can weld even in hard-to-reach places;
-
Easy maintenance – quick and hassle-free replacement of the protective lens.
Automatic wire feeder included
The wire feeding system is synchronized with the welding machine software. The feeder supplies filler material, allowing the operator to fully focus on controlling the welding head.
WELDING MODES
Choosing the appropriate welding mode allows for optimal results. The mode should be selected based on the type and thickness of the material being welded.
Infinity symbol mode – ONLY AVAILABLE WITH US, AS AN OPTIONAL FEATURE
This mode is intended for hard-to-weld materials with preheating. It produces a flat weld bead that requires no further finishing, especially useful for welding very thin materials.
Set includes
-
Laser welder with built-in cooling system
-
Welding torch with focus adjustment and a set of accessories
-
Fiber laser source
-
Automatic wire feeder
-
Complete set of cables
-
Starter kit of nozzles and protective lenses for welding
The device’s housing design may vary depending on the order date. However, the technical specifications remain unchanged, ensuring consistent quality and performance.
