-
-
Instructions in Polish
-
Service
-
Warranty 12/24 months
-
Delivery
Free
The most important advantages
- strong, compact design of a screw compressor from a European manufacturer
- automation based on modern and quality-tested components to ensure safe and effective work
- a specially designed cooler ensures optimal operating conditions even when the device is heavily loaded
- connection of the radiator to the module through good quality hydraulic lines
- the technology used allows for significant energy savings
- special air outlet design for more efficient work
- an efficient and solid pump is installed in the compressor
- a unique filtration system with three-fold separation to ensure effective operation
- The compressor uses a reliable and reliable drive transmission system using a belt transmission, which ensures high effective efficiency
- low noise of the screw compressor thanks to a specially designed soundproof housing (sound-insulating boards)
- electronic control from the MAM series allows you to set parameters, including: periods between service inspections, power failure alarms, phase direction changes, phase loss, overheating, others, operation in Master/Slave mode, ability to connect up to 16 devices in a pneumatic network, possibility of remote control using a computer and others
Technical parameters of Theor 7.5
| Engine power |
5.5 kW |
| Tension |
400V/50Hz |
| Performance at 0-6 bar |
690 l /min |
| Performance at 6 bar |
650 l/min |
| Performance at 8 bar |
650 l/min |
| Performance at 10 bar |
630 l/min |
| Outlet diameter (G) |
3/4" |
| Dimensions |
770 x 640 x 860 mm |
| Libra |
170 kg
|
Technical parameters of N10S
| AIR OUTLET AND INLET PIPE DIAMETER (BSP) |
1" |
| WORK IN PRESSURE SYSTEMS |
UP TO 10 BAR |
| INLET TEMPERATURE |
≤38°C |
| DEW POINT TEMPERATURE |
3°C at operating overpressure |
| EFFICIENCY |
1500 l/min |
| POWER |
0.58 kW |
| TENSION |
230V |
| DIMENSIONS (L x W x H) |
380x600x625mm |
| LIBRA |
31kg |
| TYPE AND QUANTITY OF COOLING AGENT |
R134a, 400 g |
1000l tank parameters:
| Weight (kg): |
230 |
| Connections: |
8 |
| Connection Size: |
1/2", 2" |
| Size: |
222.7 x 85 cm |
| Tank capacity (l): |
1000 |
| Working pressure (bar): |
11 |
| Diameter (mm): |
Ø 850 |
| Height(mm): |
2250 |
The accessories set includes:
- side from top 1 1/2" -> 1" -> 3/4"
- side bottom 1 1/2" -> 1" -> 3/4"
- cork top 3/4"
- valve 1/2" down + reduction 3/4" -> 1/2"
- 1/2" pneumatic connector
- glue
- 1/2" nipple
- tee 1/2"
- safety valve 1/2"
- pressure gauge +reduction 1/2"-> 1/4"
Manufacturer: Cormak
CORMAK JERZY ZALEWSKI
street Brzeska 120, 08-110 Siedlce, Poland
16 other products in the same category:
