-
-
Instrukcja
po polsku
-
Serwis
-
Gwarancja
12/24
miesięcy
-
Dostawa
500,00 PLN
Machine features
This machine allows for cutting manually and automatically. Manual mode enables performing all activities manually, using machine's control panel. Automatic mode – after machine is switched on, the whole cutting process is done without its operator's interference, that is, mounting cut detail in the vice, its repositioning to set dimensions, lowering the cutting arm as well as its raising to the specified height after the cutting process is finished.
Cutting parameters such as the number of cut details, their dimensions, cutting band speed and arm lowering speed are set on the control panel. Machine is stopped automatically when the cutting process is finished, the cutting band breaks or in the case of any other failure identified by the machine's operating system.
Machine's body is made of cast iron, mounted on a rigid, spatial housing construction made of plates. The steel construction of the frame is inclined at an angle of 3º in relation to the feeding table surface, beneficial during cutting rectangular elements and shapes. Inside the housing are located: a hydraulic unit, a flood coolant container along with a pump and a chips container.
Cutting band drive is based on a motor controlled with an inverter, providing smooth adjustment of a wide range of speed. Hydraulic band tensioning ensures optimum cutting band working conditions. In the case of band breakage the machine stops automatically. Precise band guiding is achieved by guides with bearings and cemented carbide inserts. Maximum cutting parameters and long-term reliability of the blade are achieved due to a cooling system and a cleaning brush.
Forced hydraulic arm lowering is adjustable by an accurate throttle valve. Quick feed system makes it possible to shorten the cutting time of some elements. Hydraulic material feeding system enables fully automatic working cycle of the machine. Controller, equipped with an LCD screen, is capable of programming the operation of the blade, indicates absence of material, provides errors and informs about the number of cut sections according to the time set. Maximum material feeding length in one stroke measures 500 mm, with +/- 0.2 mm margin for each stroke.
The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability.
Technical data
| Type |
automatic column
|
|
Arm raising and lowering
|
hydraulic with smooth control
|
| Band speed |
20–100 m/min
|
| Steady and feeding vice |
hydraulic
|
| Minimum cutting diameter |
Ø 5 mm
|
| Minimum material length in vice |
30 mm
|
| Vice base height |
780 mm
|
| Cutting band |
34×1.1×3950 mm
|
|
Main motor power
|
4.4 kW
|
| Hydraulic unit power |
1.5 kW
|
| Coolant fluid pump power |
0.75 kW
|
|
Dimensions (L×W×H)
|
2300×1780×1650 mm
|
| Weight |
1900 kg
|
Max. cutting range
| Angle |
 |
 |
| 0º |
ø300 |
300×400 |
Default equipment
- Automatic cycle operation
- Touchscreen LCD control panel
- Programming numbers and lengths of cut details
- Possibility of storing 5 various cutting macros
- Electronic display of band speed
- Arm position memory function
- Built-in hydraulic unit
- Vice position storage function
- Smooth cutting speed adjustment (motor with an inverter)
- Powered brush for cleaning the band
- Cooling system
- Bi-metal saw blade
- EC Declaration of Conformity
- User manual
12 other products in the same category:
Automatic column band saw CORMAK H-280SA
gross
€12,563.83
€11,922.81
The CORMAK H - 280SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
S-440RHA Automatic Band Saw for Angled Cutting
CORMAK S-440R HA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
Automatic Column Band Saw CORMAK H-350 RHA
Automatic band saw with the possibility of cutting at an angle of up to 60 °. This model is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and the strong frame of the saw in combination with the column structure provides excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metalworking.
CORMAK H-500SA automatic column band saw for metal
The CORMAK H - 500SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
B-430 Automatic Metal Band Saw 34mm
CORMAK B-430 is a high-class automatic column band saw that enables cutting material with a diameter of 400x400. The solid body and the strong frame of the saw in combination with the column structure ensure excellent rigidity and an exceptional level of stability during the cutting process, even of the most difficult metals in processing.
Automatic column band saw CORMAK H-260SA
The CORMAK H - 260 HA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
CORMAK H-400SA automatic column band saw for metal
The CORMAK H - 400SA column band saw is a high-performance machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
CORMAK HR-350SA automatic column band saw for metal
The column band saw CORMAK H-350SA is a high-performance machine designed for cutting solid elements and profiles in automatic cycle. The robust body and strong saw frame, combined with the column construction, ensure excellent rigidity and an exceptional level of stability during the cutting process, even for the most challenging metals. The saw is equipped with a PLC controller and a user-friendly touch screen. A notable advantage of this model is the swiveling head, allowing cutting in the range of 0° to 60° – both in automatic and semi-automatic cycles with smooth angle adjustment.
S-200RHA Automatic Band Saw
CORMAK S-200RHA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
B-530 Autoatic Metal Band Saw 41mm
CORMAK B-530 column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
H-300 HA / C33 Automatic Column Band Saw
gross
€17,948.44
€16,922.80
CORMAK H-300HA column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
Automatic column band saw CORMAK H-300SA
The CORMAK H - 300HA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
