The CORMAK H - 500SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
Automatic band saw can work on manual and automatic modes.
Manual mode allows you to perform all actions manually from the desktop of the machine.
Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in a vice, moving it to the specified dimension to the cutting band, lowering the cutting arm and raising it to the desired height after finishing cutting takes place without the operator's operation.
Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected.
The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The steel structure of the frame is inclined at an angle of 3 degrees in relation to the surface of the feeding table, which is particularly beneficial when cutting rectangular elements and profiles.
The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulic tension of the belt allows for optimal working conditions of the belt. If the saw blade breaks, the machine stops automatically. Precise belt guidance is ensured by guides consisting of guide bearings and inserts made of sintered carbides. The movable tape guiding head is set depending on the size of the material to be cut, which increases the stability of the tape operation. Maximum cutting parameters and extended saw blade life are ensured by the cooling system and the cleaning brush.
The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements.
Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke.
Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation.
| Cut range | Ø500 or 500 x 500 |
| Band saw blade |
5550 x 41 x 1.3mm |
| Cut speeds | 40/60/80 m/min. |
| Engine | 5,5kW |
| Hydraulic power pack | 1,5kW |
| Coolant pump | 0.09kW |
| Feeder pitch | 500mm |
| Load capacity | 3000 kg |
| Table height | 600 mm |
| Dimensions | 2900x2200x1900mm |
| Weight | 2400 kg |
| angle |  |
 |
| 0º | ø500 | 500 × 500 |
work in automatic cycle,
arm position memory function,
built-in hydraulic unit,
vise position memory function,
change cutting speed,
motorized belt cleaning brush,
cooling system,
bi-metal band saw,
CE declaration of conformity,
User's manual.
phone: +48 501 944 934
export@cormak.pl
phone: +48 609 939 400
export@cormak.pl
phone: +48 609 939 051
export@cormak.pl
phone: +48 609 939 741
export@cormak.pl
B-330 Automatic Column Metal Band Saw 34mm
gross €17,661.52
CORMAK H-300HA column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
Automatic column band saw CORMAK H-260SA
gross €11,204.86
The CORMAK H - 260 HA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
B-430 Automatic Metal Band Saw 34mm
gross €23,023.05
CORMAK B-430 is a high-class automatic column band saw that enables cutting material with a diameter of 400x400. The solid body and the strong frame of the saw in combination with the column structure ensure excellent rigidity and an exceptional level of stability during the cutting process, even of the most difficult metals in processing.
H-300 HA / C33 Automatic Column Band Saw
gross
€17,948.44
€16,922.80
CORMAK H-300HA column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
B-530 Autoatic Metal Band Saw 41mm
gross €27,123.05
CORMAK B-530 column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
Automatic column band saw CORMAK H-300SA
gross €13,333.32
The CORMAK H - 300HA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
gross €16,051.01
CORMAK S-200RHA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
Automatic column band saw CORMAK H-280SA
gross
€12,563.83
€11,922.81
The CORMAK H - 280SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
CORMAK HR-350SA automatic column band saw for metal
gross €21,794.85
The column band saw CORMAK H-350SA is a high-performance machine designed for cutting solid elements and profiles in automatic cycle. The robust body and strong saw frame, combined with the column construction, ensure excellent rigidity and an exceptional level of stability during the cutting process, even for the most challenging metals. The saw is equipped with a PLC controller and a user-friendly touch screen. A notable advantage of this model is the swiveling head, allowing cutting in the range of 0° to 60° – both in automatic and semi-automatic cycles with smooth angle adjustment.
Automatic Column Band Saw CORMAK H-350 RHA
gross €23,051.26
Automatic band saw with the possibility of cutting at an angle of up to 60 °. This model is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and the strong frame of the saw in combination with the column structure provides excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metalworking.
CORMAK H-400SA automatic column band saw for metal
gross €20,615.36
The CORMAK H - 400SA column band saw is a high-performance machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
S-440RHA Automatic Band Saw for Angled Cutting
gross €25,230.74
CORMAK S-440R HA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
The CORMAK H - 500SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen.
