POWERMAX 65 Plasma Source for Cutters
gross €5,615.38
Manual or mechanical plasma system for metal cutting and gouging.
Manual or mechanical plasma system for metal cutting and gouging.
Output voltage | 400 V, 3 phases, 50/60 Hz |
Input current at 16.8 kW | 400 V, 3 phases 36 A |
Output current | 30–125 A |
Rated output voltage | 175 V DC |
Work cycle at 40°C |
100% at 125 A, 400 V, 3 phases |
Open-circuit voltage (OCV) | 305 V DC |
Dimensions with handles | 592×274×508 mm (length×width×height) |
Weight with 7.6 m blowtorch | 48.9 kg |
Gas feed | Clean, dry oil-free air or nitrogen |
Recommended gas flow intake speed / pressure |
Cutting: 260 l/min at 5.9 bars Gouging: 212 l/min at 4.1 bars |
Length of the power cord | 3 m |
Power supply type | Inverter — IGBT (Insulated Gate Bipolar Transistor) |
Required rated drive power | 40 kW at full 125 A of voltage |
Compliance with regulations | EC declaration of conformity, C-Tick, GOST TR CU, UkrSepro and Serbian – for usage in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia and Ukraine as well as other applicable countries |
phone: +48 501 944 934
export@cormak.pl
phone: +48 609 939 400
export@cormak.pl
phone: +48 609 939 051
export@cormak.pl
phone: +48 609 939 741
export@cormak.pl
POWERMAX 65 Plasma Source for Cutters
gross €5,615.38
Manual or mechanical plasma system for metal cutting and gouging.
POWERMAX 105 Plasma Source for Cutters
gross €9,974.35
Manual or mechanical plasma system for metal cutting and gouging.
POWERMAX 85 Plasma Source for Cutters
gross €7,410.25
Manual or mechanical plasma system for metal cutting and gouging.
Write your review
* Required fields
I accept privacy policy rules or Cancel