- Reduced price
Language:
shopping_cart
€0.00
0 pcs.
0 pcs.
330x700 Universal Lathe with base
Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base.
VAT included
€3,235.89
The price has not changed
-
-
Instrukcja
po polsku - Serwis
-
Gwarancja
12/24
miesięcy -
Dostawa
Gratis
Machine description:
- Durable and stable construction, the bed is made of high quality cast iron.
- 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque.
- Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions.
- Spindle shaft mounted by two angular contact bearings.
- 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts.
- Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials.
- Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed).
- The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones.
- Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears.
- Hardened and ground wheels toothed in the spindle gearbox.
- Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI.
- With lead screw for threading or automatic longitudinal feed.
- Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts.
- The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards.
Technical parameters
| 3-jaw chuck | 160mm |
| Max. turning diameter over bed | 330mm |
| Max. turning diameter over carriage | 220mm |
| Max. detail length in centers | 700mm |
| Max. length of the installed part | 650mm |
| Bed width | 160mm |
| Spindle bore | 38mm |
| Spindle taper | MK5 |
| Dimensions of lathe post | 75 x 75 x 20mm |
| Top slide range | 100 (0.05) mm |
| Traverse range | 150 (0.1)mm |
| Longitudinal shift range | 620(0.5)mm |
| Spindle speeds | (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min |
| Number and range of metric threads | (17) 0.5-4mm |
| Number and range of inch threads | (26) 9-40 TPI |
| Longitudinal autofeed speed | 0.105-1.396 mm/rev |
| Auto traverse speeds | 0.022-0.296mm/rev |
| Tailstock liner diameter | 40mm |
| Trail distance of the tailstock liner | 70 (0.025)mm |
| Taper of Tailstock | MK2 |
| Engine power | 1.1kW / 230V |
| Dimensions L/W/H (with base) | 1500 x 730 x 1200mm |
| Weight (with stand) | 320 kg |
Equipment:
- Lathe base
- 3-jaw chuck 160 mm
- Jaws left
- Fixed Tooth: MK3
- Change wheels
- Lubricator
- Handle and holder wrench
- A set of maintenance tools
- CE safety guards
- Manual in Polish
- CE Declaration of Conformity
Optional equipment:
- Set of lathe knives 16x16, 7 pcs (folding)
- Stand rest + steady rest
- MK3 revolving center point
- MK3/B16 Drill Arbor
- B16 3-16mm drill chuck
- HSS-CO5 / 1-10mm cobalt drill bit set
- 3/2 reducer sleeve
- MK2 and MK3 cone metal drill bit set 14.5-30mm
- Emulsifying oil, machining coolant ES-12 5L
Are you interested in this product?
Contact with us
phone: +48 501 944 934
export@cormak.pl
phone: +48 609 939 400
export@cormak.pl
phone: +48 609 939 051
export@cormak.pl
phone: +48 609 939 741
export@cormak.pl
You might also like
Base for the TYTAN 750 PRO lathe
gross €64.10
Fixed and movable rest for lathes: 330x700, 330 x 915.
gross €192.05
Universal cooling system designed for milling machines, band saws, drilling machines and lathes.
16 other products in the same category:
gross €31,205.10
The 660 series lathes for turning metal are equipped with rapid feeds, a multi-plate clutch and digital readouts. Due to the newest solutions and its equipment, the lathe is suitable for professional and industrial work.
gross
€4,274.35
€3,843.33
Fully equipped lathe with a lead screw and a feed shaft.
- Reduced price
gross
€15,897.42
€14,712.81
This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching.
- Reduced price
gross
€20,194.85
€19,820.49
This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching.
- Reduced price
Universal lathe 500 x 2000YC + knives + turning center
gross
€22,217.67
€21,704.85
CORMAK 500x2000YC industrial metal lathe - solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 7.5 kW/400V induction motor - maximum torque, large spindle bore of 105 mm. Recommended for turning hard steels and mechanical turning. It can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric and inch threading, drilling and broaching. It is used in repair and tool workshops and in mass production.
- Reduced price
gross €22,179.21
The 660 series lathes for turning metal are equipped with rapid feeds, a multi-plate clutch and digital readouts. Due to the newest solutions and its equipment, the lathe is suitable for professional and industrial work.
gross
€13,520.50
€11,253.58
This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing , modular and DP threading, drilling and internal broaching.
- Reduced price
Universal lathe CORMAK TORNADO 400
gross
€8,692.04
€8,179.22
CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production.
- On sale!
TURN 360x1000 PREMIUM LINE Universal Lathe
gross €7,692.30
The universal lathe F 4010 (400x1000) is equipped with a 16-speed gear (45-1800 rpm) with a modern two-range engine 1.5/2.4 kW - optimal torque. Recommended for turning hard steels and mechanical turning. It can be used for many tasks, such as turning internal and external surfaces, cones, polishing, metric and inch threading, drilling and broaching.
A modern lathe for metal equipped with a rapid feed, a multi-plate clutch and a digital readout, resulting in a great solution for professional and industrial applications.
T-TURN 225 630 x 1300 Lathe for Tubes
Lathe equipped with a large spindle bore (225 mm) and a double holder for long pipes. Includes a steady rest.
gross
€31,153.82
€22,305.11
Lathes of this series can be used for many tasks, such as internal and external surfaces turning, tapers turning, buffing, modular and D.P. threading, drilling and internal broaching. Its bed also allows for turning all kinds of flat and irregular shapes.
- Reduced price
gross
€2,012.56
€1,829.49
Tytan 700 lathe from CORMAK is a rigid, durable and accurate lathe for metalworking, equipped with a lead screw. Base is available in additional option.
- Reduced price
CORMAK Tornado 360 PLUS Universal Lathe
gross
€6,882.04
€5,615.12
Professional universal lathe TORNADO 360 PLUS (360x1000 mm) for metal is equipped with 8-speed gearbox (70-2000 rpm) with induction motor (constant speed) 2.0 kW/400V - maximum torque, spindle bore 52 mm . Recommended for turning hard steels, mechanical turning. It can be used for many tasks such as internal and external surface turning, tapers, polishing, metric and inch threading, drilling and broaching.
- Reduced price
Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base.