- Reduced price
0 pcs.
660x3000 Industrial Lathe
The 660 series lathes for turning metal are equipped with rapid feeds, a multi-plate clutch and digital readouts. Due to the newest solutions and its equipment, the lathe is suitable for professional and industrial work.
-
Instrukcja
po polsku - Serwis
-
Gwarancja
12/24
miesięcy -
Dostawa
Gratis
Machine features
The 660×3000 modern lathe is equipped with rapid feeds, a multi-plate clutch and digital readout, due to which the lathe is suitable for professional and industrial work.
- Inductively hardened and precisely ground bed
- Massive cast iron structure of the machine
- Lathe equipped with a quick longitudinal and transverse movement
- Main arbor with ball bearings
- 105 mm spindle bore
- Digital readouts for 3 axes
Technical data
Swing over bed |
660 mm with an LCD readout |
|
Swing over cross slide |
455 mm |
|
Turning diameter after removing the bridge (Diameter x Width): |
885 x 170 mm |
|
Centre height |
330 mm |
|
Centre distance |
3000 mm |
|
Bed width |
350 mm |
|
Maximum tool dimensions |
25×25 mm |
|
Maximum transverse slide travel |
350 mm |
|
Maximum upper slide travel |
130 mm |
|
Spindle | ||
Spindle bore diameter |
Ф103mm |
|
Spindle taper |
D1-8 |
|
Morse taper |
Ф103mm (1:20) |
|
Number of spindle speeds |
12 |
|
Spindle speed |
25–1500 rpm |
|
Thread and feed |
||
Lead screw diameter and thread |
Ф40 x 6 mm |
|
Inch thread |
2-112 T.P.I. (60) |
|
Metric thread |
0,2-14 mm (47) |
|
D.P. thread |
4-112 D.P. (50) |
|
Modular thread |
0.1-7 M.P. (39) |
|
Longitudinal feed range |
0.059-1.646 mm/turn (35) |
|
Transverse feed range |
0,020-0,573 mm/obr (35) |
|
Tailstock |
||
Tailstock quill feed |
180 mm |
|
Tailstock sleeve diameter |
Ф 75 mm |
|
Tailstock quill taper |
MK5 |
|
Motor |
||
Spindle drive motor |
7,5kW (10HP) |
|
Coolant pump motor |
0,1 kW (1/8HP) |
|
Weight and dimensions |
||
Machine working space required (LxWxH) |
4340 x 1150 x 1510 mm |
|
Net weight |
3190 kg |
|
Gross weight |
3670 kg |
Equipment dependent on the model
- PS3-315/D8 3-jaw chuck
- 400 mm face plate
- 450 mm clamping plate
- Digital readout for 3 axes
- 4-way tool post
Are you interested in this product?
Contact with us
phone: +48 501 944 934
export@cormak.pl
phone: +48 609 939 400
export@cormak.pl
phone: +48 609 939 051
export@cormak.pl
phone: +48 609 939 741
export@cormak.pl
You might also like
gross €82.00
The MK5 rotary lathe center is used for installation at the end of the lathe tailstock. This point is characterized by an AT4 cone angle tolerance and a surface hardness of min. 58 HRC. It is intended for traditional machining and does not require balancing.
PS125 attachment for grinding shafts and holes
gross €1,256.41
PS125 shaft and hole grinding attachment - as an option for a universal lathe, which is mounted instead of the four-knife holder and is intended for external and internal grinding of details. The set includes two grinding wheels (external and internal grinding).
16 other products in the same category:
Universal industrial milling machine with CNC control intended for heavy industry operations and crafting, irreplaceable for tool rooms and repair departments. The machine is equipped with a horizontal spindle and a vertical swivel head. A table of 1370×360 allows for machining big and heavy workpieces.
Grinding wheel for the DG13MD sharpener
gross €71.54
A grinding wheel designed for CORMAK DG13MD sharpener
THEOR H2020 COMPACT screw compressor + N30S dryer + 25 BAR 1000 L pressure tank
gross €14,922.81
A set containing the THEOR H2020 COMPACT screw compressor, a vertical compressed air cylinder with a capacity of 1000 liters and an N30S dryer. The THEOR series screw compressor of the Polish brand CORMAK is the most modern solutions used in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction and high efficiency of the device guarantee effective and trouble-free operation. We have been operating on the market for over a dozen years and have extensive experience in the distribution of piston and screw compressors. As a European manufacturer, we provide our clients with proven and recognized pneumatics solutions.
RECI W6 laser tube for CO2 lasers 130W - 150W
gross €1,220.26
RECI laser tubes are characterized by high durability and precision. Their real service life is approx. 12,000 hours of operation.
Sheet Metal Rolling Mill CORMAK RM-S 1550/150
gross €21,982.03
The industrial three-roll electromechanical machine of the RM-S 1550/150 series with a motorized side shaft (pre-bending) is used for high-quality production of cylindrical and conical coatings of various diameters. This machine is designed for bending sheet metal up to 6/7 mm thick, up to 1550 mm long, with an upper cylinder diameter of 150 mm. The professional mechanical rolling mill of the RM-S series is one of the most preferred machines for mass and large-scale production.
LF50 50W Fiber Laser Marking Machine with a Rotary Chuck 110x110 mm
gross €7,435.63
Fiber laser marking machine with a very wide range of applications. The device can successfully process standard metals and their alloys (iron, copper, aluminum, zinc, etc.), precious metals (gold, silver, titanium, etc.) and other metallic materials.
gross €315.13
Swivel-base machine vice, recommended as basic equipment for milling, drilling and planing machines, etc. Lightweight design makes these very popular.
Vibra Motor DC43500 m³/h PREMIUM Dust and Fume Collector and Extractor Industrial
gross
€36,237.66
€33,083.81
Years of experience of our engineers at CORMAK led us to design a new type of DC series industrial extractors equipped with Vibra Motor engine shake off system. This allows the device to reach maximum vacuum efficiency with constantly reliable work.
- Reduced price
C1525 CNC Milling Router PREMIUM
gross
€16,399.98
€15,106.91
PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Promotion while stocks last.
- Reduced price
KFM200M Edge Grinding Machine, Manual Beveler
gross €615.13
Designed for making bevels on sheets and pipes and for processing welds formed during the welding process.
gross €922.82
The feeder is intended for marking pens and other longitudinal objects. It automates the process of marking, which helps in big scale material marking. The feeder has 20 spaces for pens.
gross €4,151.28
The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°.