The CORMAK BS-370 band saw, thanks to the equipping it with a hydraulic cylinder, cooling system and a swivel arm up to 60 °, in conjunction with blades of the renowned German company Rontgen, is widely used in all locksmith workshops, where precision, quality and cutting speed are most important.
The vertical band saw for metals, with a swivel arm, enables cutting in a plane perpendicular to the axis of the cut material and at any angle in the range from -45 ° to 60 °. The material to be cut can be fed manually or with any mechanical device, while the tool feed is automatic. The belt guides are equipped with special carbide inserts and bearings. This has a huge impact on the belt guiding, its service life, straightness, accuracy and quality of the cut. Carbide guiding significantly reduces the wear of the machine and the saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit.
The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect cleanliness and blade function. The machine is driven by a worm gear. The machine has a three-phase motor with two cutting speeds and thermal motor protection. The cutter has a CLOCK TENSOMETER - a band tension sensor and an automatic switch in the event of a cutting band breaking.
The design of the upper part of the base serves as a basin for draining the coolant and catching the chips produced during cutting the material. A cast iron workbench with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the movement of the lower arm. The speed of the arm drop (cutting speed) is regulated by a hydraulic actuator.
The feed rate is regulated on the cutting machine's control panel. We can choose between two speeds of the cutting band: 34 and 68 m / min. In the lower position of the arm (after cutting the material), the cutting band drive is automatically turned off. Safety will be ensured by the cutting band covers and micro-switches stopping the engine operation after the end of the cutting cycle or opening any of the covers, additional protection consists in switching off the cutter automatically in the event of the cutting band breaking.
| Size of the cutting band | 3160 x 27 x 0.9 mm |
| Belt tension | mechanical (manual) |
| Belt speeds | 34.68 m / min |
| Arm Drop Adjustment | stepless - hydraulic cylinder |
| Height of vice base | 890 mm |
| Diameter of saw wheel | 380 mm |
| Power | 3phase, 400V |
| Main engine power | 1.5 / 1.1 kW |
| Cooling pump motor power | 40W |
| Dimensions with base | 2200 x 1100 x 1500 (2050) mm |
| Weight | 480 kg |
| Max. cutting range [mm] | |||
|---|---|---|---|
|
Angle |
|
|
|
|
0º |
ø270 |
370 x 220 |
270 x 270 |
|
45º L |
ø200 |
220 x 80 140 x 200 |
180 x 180 |
|
45º |
ø240 |
240x160 |
220 x 220 |
|
60º |
ø160 |
150 x 150 |
150 x 150 |
phone: +48 501 944 934
export@cormak.pl
phone: +48 609 939 400
export@cormak.pl
phone: +48 609 939 051
export@cormak.pl
phone: +48 609 939 741
export@cormak.pl
BS170G 400V Metal Band Saw + 2 blades
gross €1,781.92
CORMAK BS 170G band saw, equipped with a hydraulic cylinder, cooling and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential.
BS712R 400V Metal Band Saw 20mm 45°–90°
gross €1,561.15
A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines.
gross €1,917.22
CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential.
gross €4,151.28
The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°.
BS712R 230V Metal Band Saw 20mm + 2 blades
A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines.
BS128HDRC 230V Metal Band Saw + 2 Blades 13mm
gross €602.38
Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities.
BS128HDRC 400V Metal Band Saw + 2 Blades
gross €733.99
Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities.
G5010B Portable Metal Band Saw 230V 13mm
gross €346.92
Light and portable band saw. Perfect for assembling, features simple handling. It is equipped with band guiding ball bearings and a 45° swivel head.
CORMAK BS 128HDR band saws for metal cutting are distinguished by efficiency and easy operation. This machine is an interesting proposal for every professional craftsman.
HBS210 VARIO Metal Band Saw 400V 20mm
gross €1,942.77
CORMAK HBS210 VARIO band saw, equipped with stepless cutting speed adjustment, a hydraulic cylinder, cooling and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. STRENGTHENED ARM OF INCREASED RIGIDITY EXCLUSIVELY OFFERED BY US.
gross €2,763.84
A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials.
BS712R 400V Metal Band Saw 20mm + 2 blades
gross €1,624.23
A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines.
HBS210 400V Metal Band Saw 20mm
gross €1,751.96
CORMAK HBS210 band saw, equipped with a hydraulic cylinder, cooling and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. STRENGTHENED ARM OF INCREASED RIGIDITY EXCLUSIVELY OFFERED BY US.
BS170G 230V Metal Band Saw + 2 blades
gross €1,624.23
CORMAK BS 170G band saw, equipped with a hydraulic cylinder, cooling and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential.
gross €8,974.09
A powerful band saw, equipped with a movable arm that can be rotated from -45° to +60°, a portable vice with a quick lock, a strain gauge for the tension of the cutting band and a hydraulically lowered arm with smooth adjustment. Additionally equipped with an ergonomically designed control panel, ensuring safety and comfort of work. The maximum cutting width is 490 mm.
gross €562.96
Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities.
The CORMAK BS-370 band saw, thanks to the equipping it with a hydraulic cylinder, cooling system and a swivel arm up to 60 °, in conjunction with blades of the renowned German company Rontgen, is widely used in all locksmith workshops, where precision, quality and cutting speed are most important.
